braking

How’s your braking power?

Pro Muffler Anti-Lock Brakes

 

Pro Muffler & Brake Shop Inc Tech Question:
What is the Power Brake Service?

Pro Muffler & Brake Shop Inc Tech Answer:

Howdy, Benton Harbor. Let’s talk about your brakes. Basically, the power brake system helps you provide braking power so that you don’t have to do all the work with your brake pedal. The brakes themselves are applied at the wheel using hydraulic pressure. When we step on the brake pedal, we create pressure in the power booster that’s multiplied by vacuum from the engine. The resulting pressure pushes brake fluid through the master cylinder into tubes and hoses that run to the brake at each wheel.

When there’s a problem, it’s usually a fluid leak somewhere along the line. It could be at a fitting or a hose, or even an internal leak in the master cylinder. A leak gives the pressurized fluid somewhere to go other than to the brakes, so stopping power is hurt. Lose enough fluid and you can’t stop at all. Of course that’s extremely dangerous for us Benton Harbor and the others on the road.

If you notice any decrease in stopping power or if your pedal seems mushy, you could have a problem. There are some preventive maintenance items for the power brake system that will help them last longer. At Pro Muffler & Brake Shop in Benton Harbor, we provide comprehensive brake maintenance and repair service.

Obviously Benton Harbor want to make sure their brake fluid is filled to the recommended level. Low fluid in the master cylinder could indicate a leak or worn brake material. Master cylinder leaks are usually just because it’s worn out but, leaks in the brake lines and connectors can be minimized by replacing the brake fluid from time to time. Brake fluid has additives that protect against corrosion that can damage brake components.

Benton Harbor should take note that brake fluid also attracts moisture which can lead to rust – not a good thing for expensive anti-lock brake components. Also, significant amounts of water in the brake fluid can affect stopping power because the water has a much lower boiling point than brake fluid. In the high temperature environment of the brake system, the water can vaporize – and steam doesn’t do a very good job of providing hydraulic pressure.

A final word – make sure you use the recommended type of brake fluid. There are several kinds and using the wrong one can lead to total brake failure. Your friendly and knowledgeable Pro Muffler & Brake Shop technician can help you.

Give us a call

Pro Muffler & Brake Shop
2094 South M-139
Benton Harbor, Michigan 49022
269.926.2006

http://promufflerandbrake.com/

Dear Kevin & Rich,We finally made it to the West Coast. We’re in Northern California headed down to San Fran. We picked up my PT Cruiser and it’s holding up well… So far. I don’t want to jinx myself. Hope all is well in Michigan. Perhaps we’ll meet again. Thanks for all your kindness!Sincerely, Beth & Jerod
Thank you Pro Muffler & Brake Shop! If I have a problem with my brakes or my muffler again, I will come to you! Many thanks to you & staff. My car runs so much better and because of you guys I have confidence in driving my car. Customer of '97 Honda Civic
Kevin & Pro Muffler guys, “Many thanks for your prompt, courteous & special service today!Anita

Categories